The inside interface of the Security Appliance cannot be accessed from the outside, and vice-versa, unless the management-access is configured in global configuration mode. Once management-access is enabled, Telnet, SSH, or HTTP access must still be configured for the desired hosts.

pix(config)#management-access inside
pix(config)#show running-config management-access
management-access inside

So what I needed was a simulation of four different ISPs each with different static IP, all that to test my four VPN connections between them.

Starting point.
http://www.dd-wrt.com/wiki/index.php/VLAN_Detached_Networks_(Separate_Networks_With_Internet)
http://www.dd-wrt.ca/wiki/index.php/Linking_Subnets_with_Static_Routes

To get it going all I had to do is configure VLAN on dd-wrt and then set up wireless as the client to my Wi-Fi so I can access internet and all worked without any other adjustments